Accredited by the Better Business Bureau. Sign up for our Newsletter and Spcial Sales. Visit us at Facebook Visit us at YouTube Go to your Shopping Cart


image


Autodesk Inventor 2010 Certified Training

image

image
Autodesk Inventor 2010
Sheet Metal Design

(Obsolete No Longer Available)

Learn tricks and techniques that apply to standard parts and assemblies as well as sheet metal parts.  This course covers all the sheet metal commands, explains how to fold and unfold parts, and critical techniques you’ll need to create custom punches, K-Factors and Bend Tables.

It also covers the Frame Generator, using the Weldment environment, and much more!

The Sheet Metal Design course is an advanced course with over 7 hours of instruction. Watch sample lessons from the lesson list below.

You can also browse through the lessons from the following Inventor 2010 courses and watch sample lessons from each course.
Inventor 2010: Solid Modeling
Inventor 2010: Assemblies and Advanced Concepts
Inventor 2010: 2D Drafting and Customization
Inventor 2010: Sheet Metal Design
Inventor 2010: Tube and Pipe Routed Systems
Inventor 2010: Inventor Studio

Sheet Metal Design Lessons
(Click highlighted lessons to watch them.)
Note: If you are using Google Chrome and are experiencing difficulty with sound while playing videos, please clear your browsing history. Restart Chrome, and then try again.
This will solve problems you experience with any YouTube video.

Introduction
The Sheet Metal Environment
Styles and Templates
K-Factors
Creating Bend Tables
The Flange Command
Bend Reliefs and Remnants
Bend and Sheet Metal Styles
Unfold Methods
Corner Seams
Corner Seam Reliefs
Bend Transitions and Flat Patterns
Custom Sheet Metal Templates
The Contour Flange Command
Looped Contour Flanges
Shells and Ripped Seams
Editing Flat Patterns
Using the Hem Command
Multiple Plates in Assemblies I
Multiple Plates in Assemblies II
Extended Surfaces
Using the Punch Tool
Custom Punches
Flat Pattern Punch Representations
Custom Extruded Louver Punch
Dangling Geometry in Punches
Custom Extruded Dimple Punch I
Custom Extruded Dimple Punch II
Custom Revolved Dimple Punch
Sheet Metal Commands and Punches
Surfaces
Tabs
Double Bends and Bend Allowances
Applying Bend Allowances
Knockouts
Flat Patterns on Drawings
Custom Sweep Punches
Complex Shapes
Sheet Metal Cone
Contour Roll Unrolling Unfolding
Press Break Lofted Flanges
Square to Round Transitions
Adding Flanges to Lofted Flanges
Editing with Unfold and Refold
Lofted and Rolled Part Strategies
Formed Punches and Features
Custom Structural Shapes I
Custom Structural Shapes II
Custom Structural Shapes III
Frame Skeletons
Generating Custom Shape Frames I
Generating Custom Shape Frames II
Generating Custom Shape Frames III
Generating Custom Shape Frames IV
Trimming Members
Model Frame Skeletons
More Frame Generator Concepts
Editing Frames
Preparations and Welds
Fillet and Post Weld Operations
Conclusion

Sheet Metal Design Click to Enlarge Course Outline